Tips for Fixing a Chipped Granite Countertop

Granite countertops are a stunning addition to any kitchen, but what do you do when the unexpected happens and the countertop chips? Whether you’re an avid DIY enthusiast or considering hiring a professional, it’s wise to educate yourself on the intricacies of fixing chipped granite. Follow this guide for the steps and considerations you need to know before attempting chipped granite countertop repair.

The Repair May Not be Perfect

When you fill a chip in granite with epoxy, you restore the countertop’s smoothness, but its sheen and pattern may not perfectly match the surrounding surface. This slight mismatch is usually hard to notice, especially if the slab has a complicated design. Just go into the repair knowing that achieving an exact match may not be possible.

Deciding to Repair or Not

Can chipped granite be repaired? Yes, but you might not always want to. The decision comes down to the chip’s location and your personal preference. If the chip is in a high-traffic area, fixing it may help prevent further damage or staining. On the other hand, if the chip is small and in an inconspicuous place, you might want to leave it as is, especially if you’re concerned about the difference in appearance post-repair.

When to Call a Professional

Not all granite damage is created equal. Sometimes, what looks like a chip might be a more severe problem, like a crack or fissure. These issues may affect the countertop’s structural integrity and require professional intervention. For large or complex chips and cracks, seeking a specialist’s help is the safest option.

DIY Chipped Granite Repair

If you decide to repair the chip yourself, follow these steps:

• Prepare the area: Remove nearby items to clear the workspace. Then, clean the chip and the surrounding area with nail polish remover, acetone, or mild detergent.
• Fill the chip: Apply masking tape around the chip to guide the application of color-matched gel epoxy. Mix the epoxy with color additives to match your granite’s pattern as closely as possible. After filling, use a hardening spray to set the epoxy.
• Let the epoxy dry: Follow the manufacturer’s recommended drying time, which may be a few hours or more.
• Finish the job: Once dried, remove excess epoxy with a razor blade to level the surface. Buff the area with sandpaper or steel wool to match the countertop’s sheen. Finally, apply granite sealer to enhance the appearance and protect against future damage.

Stop Your Granite Countertop from Chipping

Prevention is always better than cure. To minimize the risk of chipping, regularly seal your granite countertops. A good sealer provides a protective layer to help prevent chips. Also, avoid dropping or dragging heavy items across the countertop.

Choose Rock Solid Custom Granite

Maintaining the beauty and integrity of your granite countertops begins with choosing high-end materials and prioritizing professional installation. That’s where Rock Solid Custom Granite comes in. Our custom stonework and expert installation services reflect our years of experience serving Colorado customers. We offer expert guidance and solutions to ensure your granite countertops remain a gorgeous kitchen centerpiece. For more information or to request an installation estimate in Littleton or Durango, CO, please contact us at (720) 344-7625.